Charge Battery - Heiniger Saphir Traducción Del Manual Original

Fig. 10
4. The charging station has electronics that constantly check its functions.
A switchover may therefore last up to 3 seconds.
5. The permanent light of the green LED signalises, that the plug is connect-
ed correctly to the power outlet and the charging station is ready for use.
6. If the battery is very depleted, the charging station wakes the battery.
This may require up to 5 minutes. After that the normal charging process
will start.
6.1.2

Charge battery

Fig. 11
Fig. 12
12
Translation of the original instructions / Small animal clipper
1. Place the charging station on a
firm, even, dry, clean and free
underground.
2. Plug the charging station in the
power outlet.
3. If possible, wall mounting on the
suspension guides (1) provided
for this purpose on the back of
the charging station (screw di-
ameter 4.5 mm).
1. Test the contacts of the clip-
per (1) and the battery (2) for
foreign particles and contamina-
tion.
2. Assure, that the switch lever of
the clipper is in OFF-position
("0") (fig. 4).
3. Insert the battery (2) in the
clipper (3), until the battery in-
terlock (1) is engaged on both
sides.