Kunft KAC4254 Manual De Instrucciones página 18

Example:
To stop the air conditioning 2 hours after operation start and restart
it 10 hours after.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to display "2.0H" on the TIMER
OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to display "10H" on the TIMER
ON display.
5. Wait 3 seconds. The digital display area will show the temperature
again. The "TIMER ON OFF" indicator will remain on and this
function is activated.
Start
Off Stop
Set
2 hours later 5 hours later
after setting after setting
TIMER ON → TIMER OFF
(Off → Start → Stop operation)
This feature is useful when you want to start the air conditioning
before you wake up and stop it after you leave the house.
Example:
To start the air conditioning 2 hours after operation start, and stop it
5 hours after.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display "2.0H" on the TIMER
ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display "5.0H" on the TIMER
OFF display.
5. Wait 3 seconds. The digital display area will show the temperature
again. The "TIMER ON & TIMER OFF" indicator will remain on and
this function is activated.
34
portable air conditioner
Handling the remote control
Location of the remote
control
• Use the remote control within
8 meters from the unit, poin-
ting
Reception is confirmed by a beep.
CAUTION
• The air conditioning will not operate if curtains, doors or other
materials block the signals from the remote control to the indoor
unit.
• Prevent any liquid from falling into the remote control. Do not
expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioning may not function properly.
Use curtains to prevent the signal receiver from being under
direct sunlight.
• If other electrical appliances react to the remote control, either
move these appliances or consult your local dealer.
• Do not drop the remote control. Handle with care.
• Do not place heavy objects on the remote control, or step on it.
Using the remote control holder (optional)
• The remote control can be attached
to a wall or pillar by using a remote
control holder (not supplied, purchased
separately).
• Before installing the remote control, check
the air conditioning receives the signals
properly.
• Install the remote control holder with two
screws.
• To install or remove the remote control,
move it up or down in the holder.
35
EN
KAC4254
it towards the receiver.