Kunft KAC4254 Manual De Instrucciones página 15

10. LED FOLLOW ME Button
Press this button to Activate/Deactivate the Follow Me feature; the
remote will display your location's current temperature. The remote
control will send this signal to the air conditioning at 3-minute intervals
until you press the Follow Me button again. The air conditioning will
cancel the Follow Me feature automatically if it does not receive a
signal at any 7 minutes intervals.
11. LED Button
Press this button to Activate/Deactivate the indoor screen display.
When pressing the button, the indoor screen display is cleared;
pressing it again will light up the display.
LCD symbols
Information are displayed when the remote control is powered up.
Mode display
AUTO COOL DRY
Displayed when data transmitted.
Displayed when remote control is ON.
Battery display (low battery detection)
Not available for this unit
28
HEAT FAN
portable air conditioner
TIMER ON
Displayed when TIMER ON time is set
TIMER OFF Displayed when TIMER OFF time is set
Show set temperature, room temperature or timer under
TIMER setting
Displayed when in Sleep Mode
Displayed when in Follow me mode
Not available for this unit
Not available for this unit
Fan speed indication
Low speed
Medium speed
High speed
Auto fan speed
NOTE:
actual operation, the display only shows the function symbols in use.
How to use the buttons
Auto operation
Make sure the unit is plugged in and switched
on. The OPERATION indicator on the indoor
1. Press the MODE button to select Auto.
2
2. Press the UP/DOWN button to set the de-
3
SHORT
sired temperature. The temperature can be
CUT
1 set between 17º C ~ 30º C in 1º C incre-
MODE TIMER
ON
ments.
TIMER
FAN
OFF
3. Press the ON/OFF button to start the air
FOLLOW conditioning.
SLEEP SWING LED
ME
NOTE:
1. In the AUTO mode, the air conditioning can automatically choose
the Cooling, Fan or Heating mode by sensing the difference
29
EN
KAC4254