Window Installation Kit - Kunft KAC4254 Manual De Instrucciones

Part Description Quantity Part
Wall Exhaust Adaptor B 1 pc
(with cap) (only for all
installation)
Screw and anchor (only 4 set
for wall installation)
Window Slider A 1 pc
Window Slider B 1 pc
NOTE: Items with * are optional. Slight variations in design may occur.

Window Installation Kit

Step One: Preparing the exhaust hose assembly
Press the exhaust hose into the window slider adaptor and unit
adaptor, clamp automatically by elastic buckles of the adaptors.
Exhaust hose
Exhaust hose
assembly
Press into Press into
Window slider
Unit adaptor adaptor
Step Two: Install the exhaust hose assembly to the unit
Push the exhaust hose into the air outlet opening of the unit along
the arrow direction.
Step Three: Preparing the Adjustable Window Slider
1. Depending on your window's size, adjust the window slider's size.
2. If the length of the window requires two window sliders, use the
bolt to fasten the window sliders once they are adjusted to the
proper length.
3. For some models, if the length of the window requires three window
sliders (optional), use two bolts to fasten the window sliders once
they are adjusted to proper length.
Bolt
Window slider A Window slider B
22
Description Quantity
Foam Seal A (Adhesive) 2 pc
Foam Seal B (Adhesive) 2 pc
Remote control and 1 set
Battery
portable air conditioner
Bolts
Window slider A Window slider B
NOTE: once the exhaust hose assembly and adjustable window slider
are prepared, choose from one of the following installation methods.
Method 1: Hung Window or Sliding Window Installation (optional)
Foam seal B (Adhesive type-shorter)
or
Foam
Foam seal A
seal A
(Adhesive type)
(Adhesive
type)
1. Cut the adhesive foam seal A and B strips to the proper lengths,
and attach them to the window sash and frame as shown.
Window
slider B
Window
slider A (if required)
or
2. Insert the window slider assembly into the window opening.
Foam seal C
Foam seal C (Non-Adhesive type)
(Non-Adhesive
type)
or
3. Cut the non-adhesive foam seal C strip to match the width of the
window. Insert the seal between the glass and the window frame
to prevent air and insects from getting into the room.
Security bracket
or
2
screws
2 screws
4. If desired, install the security bracket with 2 screws as shown.
23
EN
KAC4254
Window slider C
Foam seal B
(Adhesive
type-shorter)
Window slider B
(if required)
Window slider A
Security
bracket