Operating Instructions - Utilitech DQ1709 Manual Del Usuario

OPERATING INSTRUCTIONS

Power Control
1. Turn the selector to the desired setting:
O - off Mode
If you want to shut the heater off at any time during operation, turn the Power Control to Off (O)
position. Power Light may remain lit until the heater is unplugged.
Fan Only Setting
"LO" – Low Heat Setting (750 Watts)
"HI" – High Heat Setting (1500 Watts)
Thermostat Control
1.Before setting the thermostat, allow heater to operate and heat the room. As noted above,
turn the thermostat Control clockwise to highest setting to start the heater.
2.When the desired temperature is reached, turn the thermostat control counter clockwise
until the heater turns off.
3.The control will now automatically maintain the pre-set temperature level by turning the
heater ON and OFF.
NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature.
To prevent the unit from cycling, increase the thermostat setting.
NOTE: The Power Light will remain lit during operation.
NOTE: THIS UNIT IS FOR FLOOR USE ONLY.
CAUTION: FRONT GRILL IS HOT WHEN UNIT IS IN OPERATION.
C
A
B
4
A. Power light
B. Selector
C. Thermostat control