Maintenance; Dust Box; Water Tank - SPC BAAMBA GYRO PRO SUCTION 4400 Manual De Instrucciones

EN

4. MAINTENANCE

4.1 DUST BOX

1. Remove the box from the robot.
4. Rinse the compartment under the tap, drying it
thoroughly before putting all the parts back together.
• The pre-filter must be washed once every 15-30 days when the robot is used normally.
• The working life of the HEPA filter is around 3 months of daily use.
• Do not expose any part of the filter to sunlight.

4.2 WATER TANK

1. Remove the water tank.
3. Empty the water tank as well and clean it well with a cotton cloth. When all parts of the water tank
2. Open the dust box and tip the
dirt collected into the rubbish.
2. Remove the mop and wash it under the tap, then allow it to dry.
are dry, put them back together and it will be ready to start cleaning again.
3. Remove the pre-filter, the
HEPA filter and the sponge filter.
5. Reassemble all the parts of the compartment
and replace it in the robot.