Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
R
S
ADIO
NOTE: Each channel entry must be five characters or
fewer. If you press more than five characters, the
remote says "Try again" and repeats the prompt for
step 3.
4.
Press SETUP to save this channel.
5.
Repeat steps 3 and 4 for each channel to be
stored, up to a total of 10 channels, or press
and hold SETUP to return to the programming
menu. Press and hold BACK to exit
programming.
NOTE: The remote automatically saves and exits
Favorite Channel Programming after you enter the
10th channel.
C
F
C
LEARING THE
AVORITE
HANNEL
If you no longer want to scan favorite channels, or if
you want to program a completely new list, you can
erase the saved channels. To do so:
1.
Press and hold SETUP until you hear the
programming menu, then press 2.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
At the prompt, select a Favorite Channel Mode
by pressing VCR, DVD, CBL/SAT, or TV.
3.
Press and hold SETUP to erase the saved
channels and return to the programming
menu. Press and hold BACK to exit
programming.
USING MACROS
The RadioShack 6-in-1 Easy Setup Voice Remote
includes two Macro Keys, M1, and M2. Each one can
be set up to perform a repetitive, time-consuming
operation with the press of a single key. You can also
program a macro onto any other key, except mode
keys, SLEEP, FAV SCAN, SETUP, BACK, or REPEAT.
A macro can be used to control a home theater
operation, to set a favorite channel, or for other
multiple functions you would like to control with
one key press. Moreover, each Macro Key can hold
up to 15 key presses total.
NOTE: Programming a new macro over an existing
one will erase the original macro.
P
M
ROGRAMMING A
ACRO
To program a macro to perform a sequence of
commands:
1.
Press and hold SETUP until you hear the
programming menu, then press 3.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
8
Using Macros
6-
-1 E
S
V
HACK
IN
ASY
ETUP
OICE
2.
At the prompt, press an open Macro Key
(e.g.,M1 or M2) or the POWER key.
NOTE: If you program a macro onto the POWER key,
you must press and hold the POWER key for about 2
seconds to activate the macro. Otherwise, the POWER
key will function normally (i.e., turn on the selected
device only).
3.
At the prompt, enter a series of up to 15
commands.
For example, press TV once, then POWER, then
enter 0 3 for the TV's channel number. Next,
press CBL/SAT once, then POWER, then enter 0
7 1 for the Cable Box's channel number (a total
of 9 key presses). This example turns the TV
L
on, sets it to channel 3, turns the cable or
IST
satellite box on, then sets it to channel 71.
NOTE: If there are more than 15 key presses in the
sequence, the LED displays a long flash denoting an
error and the remote says "Try again" and returns to
the prompt for step 2.
To save the macro, press and hold SETUP until
4.
the remote says "Success", the LED blinks
twice and the remote returns to the
programming menu.
Press 3 and repeat steps 2 through 4 to
5.
program another macro or press and hold
BACK to exit programming.
C
M
LEARING A
1.
Press and hold SETUP until you hear the
programming menu, then press 3.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
At the prompt, press an open Macro Key
2.
(e.g.,M1 or M2) or the POWER key.
3.
Press and hold SETUP until the remote says
"Success", the LED blinks twice and the
remote returns to the programming menu.
4.
Press 3 and repeat steps 2 and 3 to clear
another macro or press and hold BACK to exit
programming.
SETTING THE SLEEP TIMER
The RadioShack 6-in-1 Easy Setup Voice Remote
includes a sleep timer that lets you set your devices
to be turned off after a specified time, even if the
device does not have a sleep function.
S
ETTING THE
If you want to set any device to turn off after a
specified time:
1.
Press a mode key (AUD, CD, TV, VCR, DVD, CBL/
SAT).
R
EMOTE
ACRO
S
T
LEEP
IMER
Capítulos
