Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
U
A
V
C
NLOCKING
LL
OLUME
ONTROL
D
S
)
EFAULT
ETTING
1.
Press and hold SETUP until you hear the
programming menu, then press 6.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
At the prompt, press 3 to unlock all volume
control. The remote says "Success" and returns
to the prompt at the beginning of this step.
3.
Press and hold BACK to exit programming.
Volume will again be independently controlled
according to its default states for all programmed
devices.
REASSIGNING DEVICE KEYS
The RadioShack 6-in-1 Easy Setup Voice Remote
can be set to control a second device. For example,
to control a TV, a cable box, and two DVD players,
you can reassign the unused AUD key to operate the
second DVD player. To reassign a device key:
1.
Press and hold SETUP until you hear the
programming menu, then press 7.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
At the prompt, press a device key (i.e., CBL/
SAT, CD, TV, DVD, AUDIO, VCR) of the type you
want to move.
NOTE: Only one device can be assigned to an unused
device key at a time.
At the prompt, press the device key (i.e., CBL/
3.
SAT, CD, TV, DVD, AUDIO, VCR) that will now be
used for the moved device. The remote says
"Success" and returns to the programming
menu. It will also announce the new mode for
the mode key.
4.
Press 7 then repeat steps 2 and 3 for any other
devices you want to move or press and hold
BACK to exit programming.
RESETTING THE REMOTE
The RadioShack 6-in-1 Easy Setup Voice Remote
includes a Setup Code Reset program.You can use it
to restore all your programmed codes to factory
settings and delete all custom programming.
C
C
S
(B
LEARING
USTOM
ETTINGS
ASIC
IMPORTANT: Executing this program will erase
all custom settings for Macros, Learned Keys,
Reassigned Device Keys, Favorite Channels, and
Sleep and Volume Lock.
(
1.
Press and hold SETUP until you hear the
R
ESTORING
programming menu, then press 8.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
At the prompt, press 1 to reset Macros,
Learned Keys, Reassigned Device Keys,
Favorite Channels, and Sleep and Volume Lock
to the default factory settings. The remote says
"Success" and returns to the programming
menu.
Press and hold BACK to exit programming.
3.
C
A
LEARING
LL
IMPORTANT: Executing this program will erase
all custom settings including device codes.
1.
Press and hold SETUP until you hear the
programming menu, then press 8.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
At the prompt, press 2 to reset Macros,
2.
Learned Keys, Reassigned Device Keys,
Favorite Channels, Sleep and Volume Lock,
and all device codes to the default factory
settings. The remote says "Success" and
returns to the programming menu.
3.
Press and hold BACK to exit programming.
TROUBLESHOOTING
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
U
R
)
PROBLEM:
SER
ESET
SOLUTION:
O
'
M
WNER
S
ANUAL
C
P
USTOM
ROGRAMMING
The LED is flashing and the
remote is saying "Low batteries".
Replace batteries with four new
AAA alkaline batteries.
The remote said "Goodbye" and
exited programming.
Programming has ended due to
inactivity. Start programming
again and do not pause more than
15 seconds while performing
instructions.
During programming, the LED
displayed a long flash.
An invalid entry has occurred.
Check the keys to be pressed and
start program again.
How do I stop programming?
Press and hold SETUP until the
remote says "Goodbye".
Reassigning Device Keys 11
Capítulos
