Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
VCR Code:
Brand Name:_______________________
S
F
Y
C
EARCHING
OR
OUR
ODE
If your device does not respond to the remote
control after trying all codes listed for your brand,
or if your brand is not listed at all, try searching for
your code:
NOTE: Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media.
1.
Press and hold SETUP until you hear the
programming menu, then press 1.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
Press 2.
3.
At the prompt, press a device key (i.e., CBL/
SAT, AUX, TV, DVD, AUDIO, or VCR).
4.
At the prompt, press a test key, such as POWER.
NOTE: If your device or its original remote control
does not have a Power key, select a different test
function in this step (e.g., VOL+, Play, etc.).
5.
At the prompt, aim the remote control at the
device (e.g., TV) and press CH+ one or more
times to try each code. Stop when a code
performs the test function selected in step 4. If
desired, use CH- to try a previous code.
NOTE: In the search mode, the remote control will
send IR codes from its library to the selected device,
starting with the most popular code first.
To lock in the code, press SETUP once.The LED
6.
blinks twice and the remote plays "Success"
and returns to the Device Programming
options.
7.
Repeat steps 2 through 6 to program another
device or press and hold SETUP to exit
programming.
NOTE: Use the appropriate device key and test
function key for the device you are searching for.
C
T
C
HECKING
HE
ODES
If you have set up the remote control using the
Searching For Your Code procedure (on page 7), you
may need to find out which four-digit code is
operating your equipment. To do so:
Press and hold SETUP until you hear the
1.
programming menu, then press 1.
2.
Press 3.
3.
At the prompt, press a device key (i.e., CBL/
SAT, AUX, TV, DVD, AUDIO, or VCR). The remote
will state the code.
O
WNER
4.
Write down the code digits in the appropriate
code boxes on page 6.
5.
Repeat steps 2 through 3 to hear another
device's code or press and hold SETUP to exit
programming.
NOTE: Use the appropriate device key for the device
you are noting.
USING CHANNEL SCAN
In the VCR, DVD, CBL/SAT, or TV mode, use the FAV
SCAN key to start a 3-second scan of all channels. If
programmed, use the FAV SCAN key to scan only
your favorite channels (see "Programming Favorite
Channel Scan" on page 7).
1.
Press VCR, DVD, CBL/SAT, or TV to select that
device.
2.
Press FAV SCAN once.The LED will blink as
each channel is changed.
•
If Favorite Channel Scan has been set up,
scanning of favorite channels will start
and cycle through stored channels for
3 minutes or until stopped by pressing
any key.
•
If Favorite Channel Scan has not been set
up, scanning will start with the current
channel, then proceed to the next channel
up and cycle through all channels for 3
minutes or until stopped by pressing any
key.
3.
To stop scanning channels at any time, press
any key once.
P
F
C
ROGRAMMING
AVORITE
HANNEL
In the VCR, DVD, CBL/SAT, or TV mode, you can store
a list of up to 10 favorite channels, in any order, that
will be immediately scanned when you press FAV
Scan (see "Using Channel Scan" on page 7).
NOTE: You can only program Favorite Channels for
one mode. After programming, if you press FAV Scan
while in another mode, the remote control will start a
normal channel scan instead (if applicable to the
selected device).
1.
Press and hold SETUP until you hear the
programming menu, then press 2.
NOTE: If more than 15 seconds pass between key
presses, the remote says "Goodbye" and exits
programming.
2.
At the prompt, select a Favorite Channel Mode
by pressing VCR, DVD, CBL/SAT, or TV.
3.
At the prompt, use the Number Keys to enter a
favorite channel number (e.g., 0 1 2),
including +100 or Enter, if your device
requires this.
Using Channel Scan 7
'
M
S
ANUAL
S
CAN
Capítulos
