Tools And Materials; Before You Begin - Kohler K-18486 Guia De Instalacion

Tools and Materials

Adjustable
Strap
Hex
Wrench
Wrench
Wrenches
Drill and Small
Level
Hole Saw
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

IMPORTANT! For freestanding installations: Discard the following
hardware provided with the K-18486 bath filler: support plate (1),
threaded brass tubes (2), nuts (4), gaskets (4), and screws (8).
IMPORTANT! For freestanding installations: Do not remove the
protective wrap from the riser tubes until instructed to do so.
This product may be installed as freestanding (installed onto riser
tubes) or deck-mount (installed onto the bath deck). Follow the
sections that pertain to your particular installation.
Please read all instructions before you begin.
Shut off the water supply.
Observe all local plumbing and building codes.
IMPORTANT! For proper drainage of the spout, install the bath
filler to a level surface.
Before installation, unpack the new faucet trim and inspect it for
damage. Return it to the carton until installation.
1054455-2-B
All manuals and user guides at all-guides.com
1-1/2" Thin Wall
Hacksaw or
Socket Wrench
Tubing Cutter
Assorted
Thread
Screwdrivers
Sealant
2
Propane
Torch
Plumbers
Solder
Putty
Kohler Co.