Kohler K-13931 Manual Del Usuario página 9

Sprayer
5. Installation Checkout
NOTE: The water flow from the sprayer can be limited by adjusting
the angle valve.
NOTE: The water temperature can be reset by adjusting the angle
valve.
One Handle Bedpan Washer
For a one handle bedpan washer, turn on the main water supply.
Open both the check valve and the supply valve.
Check for leaks. Repair as needed.
Remove the screw, face, and washer from the sprayer.
Run water through the hose for approximately one minute to
remove debris.
Test and verify that the sprayer operates normally.
Two Handle Bedpan Washer
For a two handle bedpan washer, repeat with the other check
valve and supply valve.
Turn the water off.
Remove any debris from the sprayer and reinstall.
Test and verify that the sprayer operates normally.
Kohler Co.
Screw
Face
Washer
9 1034409-2-A