Specifications - Sony S-master WAHT-SBP1 Manual De Instrucciones

No sound is heard or sound is cut off.
• The S-AIR main unit and/or the surround
amplifier is installed in a place such as on a
metal shelf.
• Wireless LANs, a microwave (oven) and
Bluetooth applications, etc. are placed near
the surround amplifier.
• Move away the other components from the
surround amplifier or turn off the other
components.
Operation
The system does not work normally.
• Disconnect the AC power cord (mains lead)
from the wall outlet (mains), then reconnect
after several minutes.

Specifications

SS-TSB92 (Speakers)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
TA-SA100WR
(Surround amplifier)
AUDIO POWER SPECIFICATIONS
for the US model
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Amplifier section
US models:
Surround mode (reference) RMS output power
Other models:
Stereo mode (rated)
Full range Bass
reflex
5
65 mm (2 / in)
8
cone type
3 ohms
105 mm × 225 mm
1
× 85 mm (4 / in ×
4
7 3
8 / in × 3 / in)
8 8
(w/h/d)
0.6 kg (1 lb 6 oz)
With 3 ohm loads,
both channels
driven, from 120 -
20,000 Hz; rated 50
watts per channel
minimum RMS
power, with no
more than 0.7 %
total harmonic
distortion from 250
milli watts to rated
output.
: 143 W (per
channel at 3 ohms,
1 kHz, 10 %
THD)*
80 W + 80 W (at
3 ohms, 1 kHz, 1 %
THD)
13
GB