Remote Commander - Sony VPL-X2000U Manual De Instrucciones

Location and Function of Controls

Remote Commander

8
LIGHT
9
MUTING
PIC AUDIO
!º
NORMAL DOT PHASE
APA
!¡
LCD LENS CONTROL
PATTERN ZOOM
!™
!£
INPUT SELECT
VIDEO SELECT
VIDEO/S VIDEO
!¢
A B
SWITCHER/VIDEO MEMORY/INDEX
1 2
5 6
9 10/0(ALL)
!∞
1 ON/STANDBY keys
2 MEMORY key
The key does not function with this projector.
3 CENT R/B keys
The keys do not function with this projector.
4 COMMAND ON/OFF key
No keys except for the LIGHT button on the Remote
Commander function when this switch is set to OFF.
This saves battery power.
5 RGB keys
Adjust the picture.
APA: The key functions the same as the APA key on
the control panel.
14
(GB)
The Remote Commander can be used as a wireless or wired Remote
Commander. The keys on the Remote Commander with the same names
function the same as those on the control panel of the projector.
For details on control panel keys on the projector, see pages 10 (GB) and 11
(GB).
7 6 5 4 3 2
STATUS COMMAND
OFF ON OFF ON
RGB CENT
SIZE SHIFT R MEMORY
SHIFT FOCUS B
SYS SET BLKG RESET FUNCTION
PICTURE CONTROL
C D
BRIGHT
3 4
SHARP HUE
7 8
SW NO/
VIDEO MEMORY
OFF/GROUP
SWITCHER INDEX
!§
!¶ !• !ª
1
STANDBY ON
MENU
@∞
@¢
@£
ENTER
@™
CONTR POSITION
@¡
COLOR VOL
@º
DOT PHASE: Press to adjust the phase of the LCD
panels and the input signals (except for 15k RGB/
video/HDTV signals). After pressing this key,
adjust the position of the picture using the four
arrow keys so that the clearest picture is obtained.
SIZE: Enters the size adjustment mode for the input
signal. Next adjust the horizontal size of the
picture using the arrow keys.
B: to reduce horizontal size
b: to expand horizontal size
SHIFT: Enters the shift adjustment mode for the
input signal. Next adjust the position of the picture
using the four arrow keys. The picture shifts in the
direction of the arrow on the pressed key.
@§