Cleaning - COLLEXIA PROFESSIONAL NST D9201 Manual De Instrucciones

automatically switches off when not used for 45 minutes. The
indicator lights of the temperature display blink in sequence and
indicate stand-by mode.
• To reactivate the device, operate the temperature switch.
Straightening hair
• Divide the hair into strands and comb them
carefully.
• Place one strand at a time between the plates
of the device, press the grip together and pull
the device evenly from the hairline to the tip
of the hair within no longer than 5 seconds.
Attention: To avoid overheating of the hair, do not stop the
motion while the hair is pressed between the plates.
• If necessary, the process can be repeated up to 2 times until
the desired shape is reached.
Curling hair
• Divide the hair into strands and comb them
carefully.
All manuals and user guides at all-guides.com
• Perform the steps described below:
• Then let the hair cool to fix the styled shape.
• If necessary, the process can be repeated up to 2 times until

CLEANING

Never immerse the device in water or other fluids.
Before using the device again, make sure that all humid parts are
completely dry!
Clean the appliance with a damp cloth if necessary. Do not use
solvents or other aggressive or abrasive cleansers. These could
damage the surface.
Note: The plates may absorb colour during use on dyed or tinted
hair. However, this has no effect on its functioning.
- Place one strand at a time between the
plates of the device,
- press the grip together,
- turn the device one half turn around its
longitudinal axis in the direction you wish
to shape the hair and
- pull it evenly from the hairline to the tip of the hair within no
longer than 5 seconds.
Attention: To avoid overheating of the hair, do not stop the
motion while the hair is pressed between the plates.
the desired shape is reached.
ATTENTION: Before cleaning the device, switch it
off and pull the power plug from the socket!
9