Application; Installing The Battery - Schulz FPB 12VP Serie Manual De Instrucciones

APPLICATION

1. ON/OFF button – Speed control: used to turn the drill/driver on (pressed) or off (released) and gradual speed adjustment;
2. Rotation direction button: chuck rotation selection;
3. Chuck: used to hold the drills, bit tips and accessories;
4. Drilling control (revolving or impact): drilling mode selection;
5. Torque adjustment: used to select the desired torque for the job;
6. Button to unlock the battery: pressing the side buttons releases the battery;
7. Battery: power supply of the tool.
8. Auxiliary lighting: it helps in jobs in dim places.
9. Lighting ON/OFF button: it turns the auxiliary lighting on and off.
10. Battery load level LED/button: pressing the button will turn on a LED which indicates the battery load level.
- Red LED: low battery; recharge it immediately;
- Yellow LED: medium load level; attention;
- Green LED: full load; ideal for operation.
11. Recharge LED: when on, the process of charging the battery is ongoing; LED off and the battery is full.
7
FIGURE 7.2
6
7
FIGURE 7.1
Note: Certain drill/driver models do not feature some items; for example: - revolving or impact function.
6

Installing the battery

- Before mounting or removing the battery, turn off the tool;
- To remove the battery, press the side buttons and remove the battery;
- In order to install the battery, fit it in place until it locks.
5 4 3
2
1
26