Before Using The Appliance The First Time; Assembly - Unold 78526 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safety devices.
2. Check to make sure that all
accessories are present.
3. Make sure that the speed switch
is set to „AUS" (OFF).
4. Clean the motor block with a
damp cloth, as described in the
chapter "Cleaning and care".

ASSEMBLY

1. Make sure that the appliance is
not plugged into the electrical
outlet. The speed switch must be
set to „AUS" (OFF).
2. Make sure that the motor block is
positioned firmly on the kitchen
countertop.
3. Press the release button.
4. The swivel arm moves upward.
5. Select the desired mixing utensil:
T-mixing hook: cake batter,
mashed potatoes,
dough
Kneading hook: yeast dough,
bread dough, noodle dough
Wire whisk: beating of eggs,
cream, waffle batter, biscuit
dough and all various mousses.
Do not use the wire whisk for
heavy doughs, because it could
bend or break.
6. Attach the desired mixing utensil.
Make sure that the mixing utensil
is attached so that the notch on
the mixing utensil matches the
22
All manuals and user guides at all-guides.com
5.
7.
8.
9.
spaetzle
10. Press the release button and
All removable accessories, such as
the mixing bowl, kneading hook,
etc. can be cleaned in warm water
with mild dishwashing detergent;
then rinse with clear water and
dry thoroughly.
driver pin on the axle of the swivel
arm. Turn the mixing utensil
clockwise until it is tightly seated.
Make sure that the mixing utensil
locks into place, since otherwise
the ingredients cannot be mixed
properly.
Now place the mixing bowl under
the swivel arm. Place the bowl in
the holder and turn it clockwise
until it locks into place.
If desired, you can now put the
splash guard on the mixing bowl.
Press the splash guard firmly
onto the bowl so that it cannot
slip. The splash guard provides
protection against
but also makes it easier to add
additional ingredients. If you wish
to change the mixing utensil in
between, the splash guard does
not have to be removed.
push the swivel arm down until
it locks into place. You will hear
a click when the swivel arm locks
correctly into place.
splashing,