Function
• Built-in electronic circuit for operation with a conventio-
nal DC power pack (max. ±12 volts), Trix Systems, Trix
Selectrix or NMRA DCC digital systems.
• Automatic system recognition between digital and
analog operation.
• No automatic system recognition between Selectrix (SX)
and DCC.
• The full range of functions is only available under Trix
Systems and under DCC.
• Headlights for the locomotive change over with the
direction of travel. They can be turned on and off in
digital operation.
Notes on operation with direct current
• A filtered direct voltage is required for operation.Ope-
rating systems with pulse duration control are therefore
unsuitable.
10
All manuals and user guides at all-guides.com
Notes on digital operation:
• The first time the locomotive is used in a digital system
• The operating instructions for your central unit will give
• The values set at the factory were selected to guarantee
• This locomotive comes from the factory programmed
• Correct programming with the 66920 Mobile Station is
• Information about DCC Operation:
(Selectrix or DCC), the decoder must be set for this di-
gital system. To do this, the decoder must be program-
med once in this digital system (Example: changing an
address).
you exact procedures for setting the different param-
eters.
the best possible running characteristics.
for the digital address „01" (Selectrix) / „03" (DCC)
Number of speed levels that have been set: 28 (DCC)
and 31 (Selectrix).
possible starting with version number 034.
The setting done at the factory does not permit opera-
tion with opposite polarity DC power in the braking
block. If you want this characteristic, you must do with-
out conventional DC power operation (CV29 / Bit 2 = 0).
