Mobicool A40 Instrucciones De Uso página 12

All manuals and user guides at all-guides.com
Operating the cooler
➤ Press in the rotary switch (2 3, page 3) and hold it in for approx. 10 s to
force out any air in the hose connection.
➤ Turn the rotary switch (2 3, page 3) towards " ".
✓ You will hear a regular clicking noise: the Piezo ignition is trying to light
the flame. When the flame is burning, the cooler is ready for use.
➤ If the flame does not ignite, repeat the procedure.
Tip!
If it is not possible to light the gas with the Piezo lighter due to high
air humidity, you can light the gas burner with a match at the opening
in the back panel of the device when the rotary switch is pressed in.
➤ Check that all hose lines and all connections are in a technically perfect
condition at regular intervals.
➤ To switch off the cooler, first close the valve on the bottle and then turn
the rotary switch (2 3, page 3) completely shut in a clockwise direction.
Replacing the gas bottle
Only change the gas bottle in well ventilated areas.
Make sure that there are no sources of ignition in the vicinity.
Only change the gas bottle when the cooler is switched off.
➤ Switch off the cooler by completely shutting the rotary switch (2 3,
page 3) by turning it clockwise.
➤ Completely close the valve on the gas bottle.
➤ Unscrew the valve from the bottle.
➤ Check the condition of the hose line.
Replace the hose line if the material is brittle or porous.
➤ Screw the pressure reduction valve tightly onto the new bottle.
Defrosting the cooler
Humidity can form frost in the interior of the cooler. This reduces the cooling
capacity. Defrost the device in good time to avoid this.
Caution!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooler.
➤ Place them in another cooling device to keep them cool, if necessary.
12
A-40