Data Backup; Backup From Usb To Disc - Plextor 102894 Manual Del Usuario

5. Press > to enter the Function (1. Function) menu.
6. Select " 1. Disc Copy" and press
Disc Copy. Press
7. A "
copying the disc content into the USB drive.
Note:
The copied disc content is temporarily saved into the USB drive.
8. When the copying process is complete, the drive automatically ejects and a message similar
to "Put Blank DVD+R" should appear on the LCD display.
9. Remove the disc, and insert an empty disc of the same disc type.
Note:
The drive will automatically eject if the new inserted disc is not the same type or it is not an empty
disc.
10. If the inserted matched the same disc type, the drive will automatically start writing on the
new disc.
11. When the writing process is complete, the drive automatically ejects and an "
Copy?" message appears on the LCD display.
- To make additional copies, press
- To end the process, press
Note:
•
The displayed message varies depending on the connected device, current operation, and disc type.
•
You can also customize the burning settings before you start burning the disc. Refer to
page 20.

Data Backup

Backup from USB to Disc

You can copy any data stored on the USB device onto a disc.
1. Connect the AC/DC adapter and turn on the drive.
2. Press the Eject button to eject the tray and then place the disc on the tray.
3. Close the disc tray.
4. Connect your drive and the USB device by using the USB cable. Refer to
Devices" on page 15.
5. The drive automatically detects the device and a message similar to "
to Start" should appear on the LCD display.
6. Press to start copying data.
7. When the writing process is complete, the drive automatically ejects and a "
message appears on the LCD display.
Note:
•
If there is no disc inserted into the drive, a "
display.
to confirm the selection.
to Start" message appears on the LCD display. Press
and repeat Step 9~11.
and a "Copy Complete" message appears on the screen.
USB -> Disc. Insert Disc" message appears on the LCD
to start
Additional
"Burn Setup" on
"Connecting to USB
USB -> DVD+R. Press
Completed"
17