Intended Use - 3M Littmann II S.E. Manual Del Usuario

Intended Use

This product is intended for limited physical
assessment and other general purpose uses
such as blood pressure assessment. It can be
used for auscultation of heart, lung and other
body sounds. This product is not designed, sold
or intended for use except as indicated.
Precautions
• Avoid extreme heat, cold, solvents, and oils
• The entire stethoscope can be wiped
clean with alcohol or soapy water.
• Eartips can be removed from the ear
tubes for thorough cleaning.
NOTE: Do not immerse your stethoscope into
any liquid or subject it to steam sterilization. If
disinfection is required, the stethoscope may be
wiped with a 70% isopropyl alcohol solution.
Instructions for Use
Chestpiece
On 3M Littmann stethoscopes with traditional
™ ®
combination chestpiece, you select either the
diaphragm or open bell side by holding the
chestpiece stem in one hand and rotating the
chestpiece with the other hand until a click is felt.
Changing Frequencies Using
the Tunable Diaphragm
Your Littmann Lightweight II SE Stethoscope is
equipped with a 3M tunable style diaphragm that
enables you to listen to both low and high frequency
sounds without turning over the chestpiece.
the chestpiece. To listen to low and high frequency
sounds without removing and turning over the
chestpiece, simply alternate between light and firm
pressure on the tunable diaphragm.
Eartip Replacement
design for attaching the eartip to the eartube. The
eartips are pushed onto the end of the eartube and
snapped firmly into place. To remove, pull firmly on
the eartip.
2
Low frequencies: To listen to
low frequency sounds,
(traditional bell mode) you
can use wither the open bell
or tunable diaphragm using
very light skin contact.
High frequencies: To listen to
higher frequency sounds,
using the tunable
diaphragm, press firmly on
For maximum acoustic
performance, comfortable
patented 3M ™ Littmann
Tight Soft-Sealing Eartips are
provided with your stethoscope.
This stethoscope utilizes a unique
® Snap