Factory Reset - Sangean DPR-16 Instrucciones De Manejo

Factory reset

If you wish to completely reset your radio to its initial state this may
be performed by following this procedure. By performing a factory
reset, all user entered settings will be erased.
. Access the menu for the current mode by pressing and holding
the Menu button. Rotate the Tuning Control Rotary to highlight the
'System' option, then press the Tuning Control Rotary to confirm.
2. Rotate the Tuning Control Rotary until 'Factory Reset' is highlighted
and then press the Tuning Control Rotary to confirm the setting.
3. Rotate the Tuning Control Rotary until 'Factory Reset' is highlighted
and then press the Tuning Control Rotary to confirm the setting.
Rotate the Tuning Control Rotary to highlight 'YES' to proceed.
If you do not wish to carry out a system reset, highlight 'NO' and
then press the Tuning Control Rotary to confirm the setting. The
display will revert to the previous menu.
4. With 'YES' highlighted, a full reset will be performed and the radio
will restart as if first plugged in. The DAB stations list together
with any preset stations will be erased All configuration settings
will be restored to their defaults, the clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described
above to resume normal operation. It may be necessary in some
cases to disconnect the mains power, then reconnect power after
0 seconds. In case of malfunction due to electrical fast transient
(burst), reset the product as above (reconnection of the power
source may be required) to resume normal operation.
35
All manuals and user guides at all-guides.com