Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some
hiss may be audible. It is possible to reduce this hiss by forcing the
radio to play the station in mono rather than stereo.
. Press the Band button as needed to select the FM radio mode
display and tune to the required FM station as previously described.
2. Press and hold the Menu button to enter the FM menu.
3. Rotate the Tuning Control Rotary until 'Audio setting' is highlighted
on the display. Press the Tuning Control Rotary to enter the audio
setting mode. The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM
signal rotate the Tuning Control Rotary until 'Forced mono' is
highlighted. Press the Tuning Control Rotary to confirm the setting.
Alternatively, to return to the normal automatic 'stereo or mono'
mode press the Tuning Control Rotary until 'Stereo allowed' is
highlighted. Press the Tuning Control rotary to confirm the setting.
25
All manuals and user guides at all-guides.com