Setting The Alarm - Sangean DPR-16 Instrucciones De Manejo

Setting the alarm

There are two alarms which can each be set to wake you to FM,
DAB or buzzer alarm. The alarms may be set while the unit is
playing. Each alarm can be set to sound once, daily, on weekdays
or at weekends. The alarms can only be set when your clock radio
is switched on and in DAB or FM mode.
Ensure that the time is set correctly before setting the alarms.
. Press the Standby button to switch on the clock radio.
2. Press the Alarm button. The display will show "Alarm  setup" or
press the Alarm button again to enter 'Alarm 2 setup.'
3. Press the Tuning Control Rotary to enter the alarm setting and
the display will show 'Alarm  Wizard' or 'Alarm 2 Wizard.'
4. Rotate the Tuning Control Rotary to choose between 'Alarm On'
or 'Alarm Off' and press the Tuning Control Rotary to confirm the
setting. Choose 'Alarm On' to continue the alarm setting. If 'Alarm
Off' is selected, the current setting for that alarm will be cancelled.
5. Rotate the Tuning Control Rotary to select the desired hour.
Press the Tuning Control Rotary to confirm the setting.
6. Rotate the Tuning Control Rotary to select the desired minute.
Press the Tuning Control Rotary to confirm the setting.
7. Rotate the Tuning Control Rotary to select the duration for the
current setting alarm. The options are 5, 30, 45, 60 and 90.
Press the Tuning Control Rotary to confirm the setting.
All manuals and user guides at all-guides.com
GB
28