3. To set the feature, press the ST/STP button to increase and RESET
button to decrease the setting.
4. To move to the next setting, press and release the MODE button.
5. After all settings are entered, to save the new settings, hold the
MODE button down for 2-3 seconds until the display stops flashing.
Setting the Daily Alarm Time
1. While in the Alarm mode, hold the MODE button down for
2-3 seconds until the 'hour' display flashes.
2. To set 'hour' , press the ST/STP button to increase and RESET button
to decrease the setting.
3. To move to 'minutes' , press and release the MODE button.
4. After 'hours' and 'minutes' are set, to save, hold the MODE button
down for 2-3 seconds until the display stops flashing.
Turning the Daily Alarm ON/OFF
:
6 00
P
Daily Alarm Indicator
1. While in the Alarm mode, press the ST/STP button once to turn the
Daily Alarm ON or OFF.
2. When the Daily Alarm Indicator appears, the daily alarm is ON.
The Watch will start beeping at the designated alarm time for
30 seconds. To stop the beeping early, simply press any button
(except the LIGHT button).
8
SP3637IS03SPO.indd 9-10
All manuals and user guides at all-guides.com
AL
2 18 :
Turning the Hourly Chime ON/OFF
:
6 00
P
Hourly Chime Indicator
1. While in the Alarm mode, press the RESET button once to set the
hourly chime ON or OFF.
2. When the Hourly Chime Indicator appears, the hourly chime is ON,
and the Watch will beep at the top of each hour.
Using the Chronograph Feature
The Chronograph feature measures elapsed time from a zero starting
point. The maximum counting range of the chronograph is 99 hours,
59 minutes and 59 seconds.
To use the Chronograph, press the MODE button to select the
Chronograph mode. The Watch can now be used to record an elapsed
length of time.
1. Press the RESET button to reset counter to '0' .
2. Press the ST/STP (start/stop) button once to start timing.
3. Press the ST/STP (start/stop) button to stop timing.
4. To reset the chronograph to '0' press the RESET button.
AL
2 18 :
9
9/19/11 11:55 AM