WELDY sealer GW800 Manual De Instrucciones página 2

Operating Manual
GB
Please read operating instructions carefully before use
and keep for further reference.
WELDY sealer GW800
Automatic Welder
Application
Welding geomembranes such as LDPE, PVC, HDPE, EVA, PP for applications in:
• civil engineering
• expressway
2
(Original operating instructions)
• reservoirs
• waterproofing works
Warning
DANGER!
Danger when opening up the tool, as live components and connections are
exposed. Therefore, before opening it, unplug the tool to ensure disconnection
from the mains.
Danger of fire and explosion! Incorrect use of the Automatic Welder (e.g.
overheating of the material) can present a fire and explosion hazard, especially near
combustible materials and explosive gases.
Danger – can cause burns! Do not touch bare metal parts and emerging
material while hot. Allow the device to cool down.
Only connect the tool to a receptacle with protective earth conductor. Any dis-
connection of the protective earth conductor, in or outside the tool is dangerous!
Use line/mains extension cables with protective earth /ground conductor
and adequate cross sectional area only!
Caution
The voltage rating stated on the tool must correspond to the mains voltage.
230
In case of a power loss, the speed control knob (6) and temperature control
400
knob (5) have to be set to 0.
For personal protection on building sites we strongly recommend the tool be
FI
connected to a RCCB (Residual Current Circuit Breaker).
The tool must be operated under supervision. Heat can ignite flammable
materials which are not in view. The machine may only be used by qualified
specialists or under their supervision. Children are not authorized to use
this machine.
Protect tool from damp and wet.