URBANGLIDE RIDE XS Manual Original página 8

Button instructions
1. Button On/Off: Press and hold the power button to turn on/off;
2. Accelerator: press the right trigger button to start and accelerate;
3. Brake: keep the brake lever on the brake. Press lightly on the rear mudguard to assist the brakes.
4. Briefly press the function button to directly adjust the speed.
Beginner mode: Display with a blue S.
Normal mode: Displayed by an orange S.
Sport mode: Indicated by a red S.
5. Headlights: Press the function button twice briefly to switch on the headlights. The tail lights are always
switched on. When the light is on, briefly press the function button twice to switch off the headlights and tail
lights;
6. Cruise mode: Hold the current speed for 6 seconds to switch to cruise mode; Exit cruise mode when you
press the accelerator or brake again.
Pre-assembly instructions
1. Lift the lever while pressing down on the rear mudguard.
2. Lift the post, attach the wrench, and use the backrest attachment ring to secure the wrench.
3. Secure the brake lever with an M6 hex wrench.
4. Tighten the handlebars (pay attention to the direction of rotation when tightening).
8