Playing Back Music In Mp3 Format; Aux In Socket; Cleaning And Maintenance - AEG SR 4347 Instrucciones De Servicio

NOTE:
For CDs in the MP3 format, press the BAND/ALBUM
button (15) to change the folder.
3. Select the next track with the / buttons and press the
MODE button again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FULL" flashes in the
display.
4. Press the button (7). The playback starts. The elapsed
playtime, the notification " ", respectively " MP3" and
PROG will be shown in the display.
5. Press once the button to stop the playback while retain-
ing the program.
6. To play the programme back again, press the
7. To delete the program, press the button twice. The
PROG control lamp goes out.
The device stops automatically after all programmed titles
have been played. The indication PROG goes out and the
programmed sequence is deleted from the memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

AUX IN socket

To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX-IN socket (17).
2. Turn on the device with the ST/FUNC button (16). The
device switches automatically to AUX IN operation. The
radio sound will be turned off.
3. You will hear the sound playback from the external device
through the loudspeakers. You may adjust the volume
with VOL+/AL 1 / VOL-/AL 2 (13). The CD buttons are not
functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
button. NOTE:
Adjust the volume of the external device to a comfortable
level.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
Device cannot Device crashes and
be operated. "hangs".
English
39
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.
Disconnect the power
supply for 5 sec. Then
switch the device on
again.