BGS technic 2202 Manual De Instrucciones página 11

TECHNICAL DATA
Resistance
Range
400.0 Ω
4.000 KΩ
40.00 KΩ
400.0 KΩ
4.000 MΩ
40.00 MΩ
Overload Protection: 250V rms
Continuity
Range
Overload Protection: 250V rms
When the resistance is between 30 Ω and 150 Ω, the buzzer may sound or may not sound.
When the resistance is more than 150 Ω, the buzzer will not sound.
Diode
Range
Overload Protection: 250V rms
AC Current
Range
400 A
Frequency Range: 50 - 60Hz
Max. Permitted Input Current: 400A
Response: Average, calibrated in rms of sine wave
Temperature Coefficient: 0.1 x (specified accuracy)/°C (<18°C or >28°C)
DC Current
Range
400 A
Max. Permitted Input Current: 400A
Temperature Coefficient: 1 x (specified accuracy)/C° (<18°C or >28°C)
Temperature
Range
-20°C – 0°C
0°C – 400°C
400°C – 1000°C
Use a K Type Thermocouple
Overload Protection: 250V rms
Note: The accuracy listed above does not include the tolerance of the temperature sensor. Accuracy
specification assumes that ambient temperature is stable to ±1°C. For ambient temperature changes
of ±5°C, rated accuracy applies after one hour.
OPERATION INSTRUCTION
Built-in Buzzer
1. When you press a button, the buzzer will sound a beep if the press is effective.
2. The buzzer will sound several short beeps about one minute before the meter turns off
automatically and will sound a long beep before the meter turns off automatically.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Resolution
0.1 Ω
If the resistance is less than about 30 the buzzer will sound.
Resolution
Approx. forward voltage drop of the diode will be displayed.
1 mV
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
Resolution
100 mΩ
1 Ω
10 Ω
100 Ω
1 KΩ
10 KΩ
Description
Description
Open Circuit Voltage: about 2.0V
Test Current: about 0.6mA
Resolution
0.1 A
Resolution
0.1 A
Resolution
1°C
Accuracy
± (1,2%+5)
± (1.0%+5)
± (1.2%+5)
± (1.5%+7)
Accuracy
± (2,5%+5)
Accuracy
± (2,5%+5)
Accuracy
± (4%+5)
± (1%+5)
± (2%+5)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed