Checking The Brake Fluid Level; Changing The Brake Fluid - Malaguti XTM X3M Manual De Uso Y Mantenimiento

CHECKING THE BRAKE FLUID LEVEL

MIN
If the brake liquid is insufficient, air bubbles may form in the braking
system thus impairing the effectiveness of the brake. Before
starting, make sure the brake liquid level of the rear brake reservoir
is above the minimum level mark. As far as the front brake is
concerned, the level of liquid can be checked throught the sight
glass on the pump; replenish if necessary. Observe the following
precautions:
All manuals and user guides at all-guides.com
PERIODIC MAINTENANCE AND MINOR REPAIR
• When checking the fluid level, make sure that the reference
• Use only recommended brake fluids, otherwise the rubber
• Recommended brake fluid: DOT 4
Refill with the same make of brake fluid. Mixing fluids may result
in a harmful chemical reaction and lead to poor braking perform-
ance.
When adding fluid, be careful that water does not enter the cylin-
der. Water will significantly lower the boiling point of the fluid, and
may result in vapour lock.
Brake fluid may deteriorate painted surfaces or plastic parts.
Always clean up spilled fluid immediately.
If the brake fluid goes down suddenly, have a
perform the necessary checks.
MAX
MIN

CHANGING THE BRAKE FLUID

The brake fluid must only be changed by a
Also have the following components replaced by a
Dealer during periodic maintenance or when damages or leakage
are noted:
- oil seals (every two years)
- brake hoses (every four years)
ENGLISH
line of the sight glass is horizontal when the handlebar is
turned.
seals may deteriorate, causing leakage and poor braking
perfomance.
1
2
3
4
5
Dealer
MALAGUTI
6
7
8
Dealer.
MALAGUTI 9
MALAGUTI
41