Accessories; Remote Controller Installation Procedure - Daikin BRC1E73 Manual Del Usuario

2.

Accessories

The following accessories are included.
Drywall screw Drywall anchor
(2 pcs.) (2 pcs.)
3.

Remote Controller Installation Procedure

3-1 Determine where to install the remote controller.
Make sure to follow the
3-2 If the control wire for the remote controller is to be routed
from the rear, consider the location of the access hole in the
lower case for making a hole in the wall.
Lower case
Through-hole
3-3 Remove upper case.
Insert a screwdriver in the recess of lower case to remove the upper case (2 points).
Remote controller printed-circuit
board is installed on the upper case.
Be careful not to damage the
printed-circuit board with the
screwdriver.
Be careful not to let dust or moisture
touch the printed-circuit board.
4
All manuals and user guides at all-guides.com
Wire tie
(1 pc.)
Safety Considerations
1-15/16
If the hole size is too large or not in the proper
Access
location, it may be seen after the remote
hole
controller is installed.
5/16-3/8
Screwdriver
Insert and twist the screwdriver
lightly for removal.
Operation Installation
manual manual
(1 pc.) (1 pc.)
when determining the location.
External view of the remote controller
5/16-3/8
Align the center of the wall
hole with the center of the
access hole on the controller
lower case when planning the
installation.
NOTE
Wiring retainer
(1 pc.)
[Unit : inch]
Upper case
Lower case
English