OHAUS PJX Serie Manual De Instrucciones página 13

PJX Series Balance
3. Press Yes, and PUt.ref (put the reference weight) will
display.
4. Place the reference sample on the pan to display the
weight. When the reading is stable, the * appears.
5. Press the Function / Mode button so that the weight of
the reference sample is stored in memory. The display
will show100%.
6. Remove the reference sample, and place the test
object on the pan. The ratio of the test object to the
reference sample weight is displayed as a percentage.
7. To view the reference sample weight or the test object
weight, press the Function / Mode button.
8. To establish a new reference sample weight, press and
hold the Function / Mode button and repeat the steps
described above.
EN-11