Uline H-4408 Manual De Instrucciones página 4

6. Rows 4 and 5 use double foot planks. Place clips
over the outside sets of holes. (See Figure 14)
Figure 14
Outside
Holes
7. Attach foot planks. Beginning with the bottom row,
place one foot plank on top of the clips, making
sure the clips rest under the plank in the outside
channels. The foot plank should have an 18"
overhang on both ends, measuring from the center
of the frame. Repeat for second foot plank.
(See Figure 15)
8. Confirm the frame is straight and square. Center of
the left foot plank frame to center of the right foot
plank frame should measure 6' on center.
(See Figure 16)
PAGE 4 OF 24
ASSEMBLY CONTINUED
Outside
Holes
Figure 15
18"
6'
Figure 16
9. Attach double foot planks for rows 4 and 5.
(See Figure 17)
Figure 17
10. Underneath the foot plank, turn the clips vertical
so the grooves of the clip fit securely under
the channel lips. Tighten the
clips with flange nuts.
(See Figures 18-20)
Figure 18
Figure 20
5/16" Carriage Bolt
Flange
Nut
Foot Plank
Figure 19
Hold Down Clamp
0521 IH-4408