Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-4440
I-UNIT SLATWALL TOWER
TOOLS NEEDED
Phillips Screwdriver
Rubber Mallet (Optional)
Confirmat Screw x 6
Wing Panel x 2
Camlock x 16
KICK BASE ASSEMBLY
1.
Install camlock pins into the predrilled holes in kick
base boards using screwdriver. (See Figure 1)
2. Install camlocks into large holes in kick base boards
by tapping them into position with rubber mallet.
(See Figure 2)
NOTE: Ensure the hole in the side of the
camlock always faces outward.
3. Arrange kick base boards to form a square, so that
each corner has camlock pins set into the camlocks
of the adjacent board. (See Figure 3)
4. Connect camlocks and pins by inserting screwdriver
into the top hole of the camlock and turning
clockwise. (See Figure 4)
NOTE: Tilt screwdriver at an angle while twisting
to better lock the camlocks.
PAGE 1 OF 6
1-800-295-5510
uline.com
PARTS
Camlock Pin x 12
Pan Head Screw x 16
Screw Cap x 6
ASSEMBLY
Pour le français, consulter les pages 5-6.
Spinner Base Top x 1
Caster x 4
Kick Base Board x 4
Figure 1
Camlock Pin
Figure 2
Camlock
Figure 3
Para Español, vea páginas 3-4.
Center Panel x 1
Figure 4
0521 IH-4440
Tabla de contenido
Manuales relacionados para Uline H-4440
Resumen de contenidos para Uline H-4440
-
Página 3: Torre De Panel Ranurado - Unidad I
H-4440 800-295-5510 uline.mx TORRE DE PANEL RANURADO - UNIDAD I HERRAMIENTAS NECESARIAS Desarmador de Cruz Mazo de Hule (opcional) PARTES 6 Tornillos Confirmat 12 Clavijas de 16 Tornillos de Cabeza Tuerca Alomada 1 Parte Superior de la Base Giratoria 2 Paneles Laterales... -
Página 4: Continuación De Ensamble
(Vea Diagrama 7) NOTA: No apriete completamente los tornillos hasta que haya colocado todos los paneles. Apriete completamente los tornillos una vez que los paneles laterales estén colocados. 800-295-5510 uline.mx PAGE 4 OF 6 0521 IH-4440...