Cleaning; Cleaning The Housing; Storage When Not In Use; Disposal - Silvercrest SCUR 3 A1 Instrucciones De Uso E Indicaciones De Seguridad

Cleaning

DANGER
Risk of fatal injury from electrocution!
►
Remove the mains cable
clean the device.
CAUTION
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.
► The laser unit does not require cleaning. We do not recommend the use of
cleaning media.

Cleaning the housing

♦ Clean the surfaces of the device with a soft, dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues.

Storage when not in use

♦ If you do not intend to use the device for a long period, disconnect the plug
from the mains power supply. Remove the batteries from the device and
store it in a clean, dry location away from direct sunlight.

Disposal

Disposal of the device

The adjacent symbol of a crossed-out wheelie bin means that this device is
subject to Directive 2012/19/EU. This directive states that this device must not
be disposed of in normal household waste at the end of its useful life but must be
brought to a specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the environ-
ment and dispose of this device properly.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.

Disposing of the batteries

Do not dispose of the batteries in the domestic waste. Defective or dead batteries must
be recycled according to Directive 2006/66/EC. Consumers are legally obliged to
dispose of used batteries at a collection point in their town/district or at a retail store.
This obligation is intended to ensure that batteries are disposed of in an environmental-
ly responsible manner. Dispose of batteries only when they are fully discharged.
GB │ IE
■ 50
│
from the mains power socket before starting to
SCUR 3 A1