Detach & Assemble Insert; Cleaning And Maintenance - Nuna TAVO next Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Detach & Assemble Insert
1
- Open the buckle. (36)
2
- Detach the shoulder harness pads as shown (37).
3
- Detach the crotch harness pad as shown (38).
4
- To detach the insert, pull the hook out of loop fastener.
(39)
5
- Then thread the shoulder and waist harnesses through
their respective slots of insert and then take the insert
out. (40).
To re-assemble Insert, follow the steps above in reverse.
17
TAVO next instructions

Cleaning and Maintenance

Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use silicon
lubricants as they will attract dirt and grime. Do not store
your stroller in a damp place.
Clean the stroller wheels regularly with water and remove
any dirt.
To ensure long-lasting use, wipe off this product with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and
drying instructions.
It is normal for fabric to color from sunlight and to show wear
and tear after a long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts
are torn, broken, or missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
TAVO next instructions
18
Tabla de contenido
loading

Tabla de contenido