SKF TKSA 40 Instrucciones De Uso página 16

Enter the desired values for each field with the alphanumeric keyboard.
Confirm by pressing the right/left selection arrow or OK.
Highlight the complete line to select it as the reference for the automatic tolerance check
function.
Press OK to confirm the choice and exit the table.
Next steps:
From this module you can navigate to:
Measurement module, to measure and determine the misalignment values ("A" distance
given mandatory to access this module). See section 3.5
Soft foot mode, to check the presence of a soft foot on the moveable machine and correct
it (only available when all distances are entered). See section 3.9
Settings menu, to adjust general settings. See section 4
File manager, to display and manage the saved files. See 5
3.5 Measure the alignment
Three measurements are required to evaluate the alignment status.
To define the measurement positions, we use the analogy of the clock (see fig.4)
Rotate the shafts to move the measuring units to the 9 o'clock position. Check the
positioning of the measuring units with the built in spirit levels (see fig. 7).
Confirm the measurement by pressing OK.
Leave the measuring units in position whilst the wait and warning symbol is displayed on
the screen
Fig. 15 Wait and warning symbol
SKF TKSA 40 15