ReliOn CONFIRM Manual De Instrucciones De Usuario página 60

Step 3: Mix control solution by gently
inverting the bottle. Remove the cap from the
control solution bottle. While the Apply Blood
symbol is flashing, place a drop of the
control solution on the end of the test strip. DO
NOT put control solution on top of the test
strip. The test strip will draw up the solution
and the meter will beep. The meter will begin to
count down.
Step 4: In 7 seconds, the meter will beep
again and display the control solution result.
Compare the result to the range printed on
the test strip bottle. Make sure the result is
within the acceptable range. If the result falls
within this range, the meter and test strip are
working correctly.
60