Connecting The Base To The Pabx; Dialling Mode And Flash Time; Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Gigaset A510 Manual Del Usuario

Gigaset A510-A510A / USA en / A31008-M2202-R301-1-3S19 / pabx.fm / 25.08.2011

Connecting the base to the PABX

Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
manual.

Dialling mode and Flash time

Changing the dialling mode
The following dialling modes can be
selected:
u Tone dialling (DTMF)
u Pulse dialling (PD).
§Menu§
P#Q5#11
~ 1
§OK§
Or:
~ Q
§OK§
Please note
Tone dialling (DTMF) is now the most
common dialling mode. Pulse dialling
mode (PD) is used only for a few old
PABXs.
Setting flash time
Your phone is preset for operation on the
main connection. For operation on a PABX,
you may have to change this value. Please
refer to the user guide for your PABX.
§Menu§
P#Q5#12
~
0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
48
Open main menu.
Press keys.
Pulse dialling mode (DP).
Tone dialling (DTMF).
Open main menu.
Press keys.
Enter number for the flash time
§OK§
and press .

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
§Menu§ Open main menu.
P#Q5#1O
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press
Changing the pause after flash key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
Open main menu.
P#Q5#14
Press keys.
~
Enter a number for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and
§OK§
press .
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
P
Press the star key.
After the call ends, pulse dialling is automat-
ically reactivated.
§OK§
.