Würth master BMH 32-XE Instrucciones De Servicio página 13

All manuals and user guides at all-guides.com
OBJ_BUCH-820-001.book Page 13 Monday, August 18, 2008 10:25 AM
16 Clamping screw of the extraction device*
17 Depth stop of the extraction device*
18 Telescopic pipe of the extraction device*
19 Wing bolt of the extraction device*
20 Guide tube of the extraction device*
The accessories illustrated or described are not
included as standard delivery.
Technical Data
Rotary Hammer
Art. No.
Rated power input W
-1
Rated speed min
-1
Impact rate min
Impact energy per stroke J
Chisel positions
Tool holder
Lubrication
Max. drilling dia.
– Concrete (with twist
drill) mm
– Brickwork (with core
bit) mm
– Steel mm
– Wood mm
Weight according to
EPTA-Procedure
01/2003 kg
Protection class
The values given apply for nominal voltages [U] of
230/240 V.
Noise/Vibration Information
Measured values determined
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 93 dB(A); Sound power
level 104 dB(A). Uncertainty K =2 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Hammer drilling into concrete: Vibration emission
2
value a =8 m/s , Uncertainty K=1.5 m/s
h
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
18.8.08
used for different applications, with different acces-
sories or poorly maintained, the vibration emission
may differ. This may significantly increase the expo-
sure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
BMH 32-XE
0702 543 X
900
Declaration of Conformity
0–760
0–3600
We declare under our sole responsibility that the
5.0
product described under "Technical Data" is in con-
12 formity with the following standards or standardiza-
tion documents: EN 60745 according to the
SDS-plus
provisions of
Central
98/37/EC (until 28 Dec 2009), 2006/42/EC (from
permanent
29 Dec 2009).
lubrication
Technical file at:
Adolf Würth GmbH & Co.KG, PFW,
32 D-74650 Künzelsau
Künzelsau, 09.07.2008
90
Adolf Würth GmbH & Co. KG
13
32
4.7
/II
P. Zürn
❏ Before any work on the machine itself,
pull the mains plug.
according to
❏ Operate your machine only with the auxil-
iary handle 10.
The auxiliary handle 10 can be set to any position
for a secure and low-fatigue working posture.
Turn the bottom part of the auxiliary handle 10 in
counterclockwise direction and swivel the auxiliary
handle 10 to the desired position. Then retighten the
bottom part of the auxiliary handle 10 by turning in
2
, clockwise direction.
2
=7 m/s ,
h
Adjusting the Drilling Depth
(see figure A)
The required drilling depth X can be set with the
depth stop 11.
Press the button for the depth stop adjustment 9 and
insert the depth stop into the auxiliary handle 10.
the directives 2004/108/EC,
A. Kräutle
Auxiliary Handle
English–13