Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Insert hitch into frame rails and install fasteners. Once hitch is in position,
attach the carriage bolt to the pull wire. Feed the pull wire through the block and
then the frame rail and out the attachment holes. Make sure the blocks are
aligned properly and do not overlap. Use cable ties to secure the fascia around
the cross tube.
7.) Remove fascia door prior to reinstalling fascia. Reinstall hardware & fascia removed in steps 1-3. Use rivets provided to reinstall fascia. Secure the fascia by
attaching it to hitch center section with cable tie.
©2021 Horizon Global Americas Inc. - Printed in Mexico
6. Tighten all 1/2-13 Gr5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 6 of 18
76432NP
1-11-21
Rev. A
Tabla de contenido
