Horizon Global 76432 Instrucciones De Instalación página 5

2.) (Durango only) Lower the exhaust: Using exhaust removal pliers to detach
the (2) exhaust hangers on each side of the vehicle.Note: make sure that the
exhaust system is supported prior to lowering the exhaust. Note: use of spray
lubricant may be useful in removing exhaust hangers.
4.) Remove bumper beam: Using a 21mm socket, remove (3) bolts (for Durango)
or (4) bolts (for Grand Cherokee) from bumper beam, per side. Return bumper
beam and bolts to owner.
©2021 Horizon Global Americas Inc. - Printed in Mexico
3.) (Durango only) Lower the spare tire by consulting your owner's manual.
5.) Install hitch: Raise the hitch into position, slide it into frame rails, and align
with attachment holes. Using pull wire, feed the carriage bolt and spacer into
frame rails and bracket holes from end panel opening. Remove pull wires and
loosely install conical washer and hex nut to hitch, see Figure 1.
Sheet 5 of 18 76432NP 1-11-21 Rev. A