Idiomas disponibles

Idiomas disponibles

Website: www. horizonglobal.com
Technical Assistance: 800-632-3290
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4000 lb. (1814 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2020 Horizon Global Americas Inc. - Printed in Mexico
Installation Instructions
PART NUMBERS: 76339, 84339, CQT76339
Max Tongue
Weight
Weight
400 lb. (181.4 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global Americas Inc. ("We", "Us" or
1.
"Our") warrants to the original consumer purchaser only ("You" or "Your") that the product
will be free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 27
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76339NP
08-05-20
Rev. A
Tabla de contenido
loading

Resumen de contenidos para Horizon Global 76339

  • Página 1 [email protected] LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global Americas Inc. ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: will be free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2: Installation Instructions

    Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 4000 lb. (1814 kg) 400 lb. (181.4 kg) Weight Distributing Hitch Illustration ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 2 of 27 76339NP 08-05-20 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 3 of 27...
  • Página 4 3. Remove screws from wheel well liners – Using a phillips screwdriver, remove (3) screws from wheel well liners on both sides. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 27...
  • Página 5 5. Remove mud flap– Using a T15 torxbit, remove (2) screws from mud flap behind wheel well liners on both sides. Remove mud flap and keep it for reinstallation. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 27...
  • Página 6 8. Remove plastic plug above reflector– Using plastic trim removal tool, remove (1) plastic plug from the fascia above the reflector, both sides. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 6 of 27...
  • Página 7 10. Remove metal panel – Using 10 mm socket, remove (1) bolt and (1) nut from metal panel above bumper beam, both sides. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 7 of 27...
  • Página 8 12. Apply sealant - Apply silicone sealant to both hitch side bracket mounting panel. Loosely install (8) existing M14 factory bolts to the hitch, see Figure 1. surfaces, see Figure 2. included Figure 2 ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 8 of 27 76339NP 08-05-20 Rev. A...
  • Página 9 Bottom view of lower fascia Figure 3 16. Reinstall metal panels, wiring harness, fascia, mud flaps, wheel well liners, plastic panel and plug, and all fasteners. ©2020 Horizon Global Americas Inc. - Printed in Mexico Sheet 9 of 27 76339NP 08-05-20 Rev.
  • Página 10: Garantie À Vie Limitée

    [email protected] GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global Americas Inc. (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES vices de matières et de fabrication, exception faite de l’usure normale.
  • Página 11: Matériel Nécessaire

    Poids max. au timon de la remorque Sans répartition 4000 lb. (1814 kg) 400lb. (181.4 kg) de charge Illustration de l'attelage Répartition de charge ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 11 de 27 76339NP 08-05-20 Rev. A...
  • Página 12 Ne jamais utiliser une torche pour découper un accès ou un trou de fixation. Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 12 de 27...
  • Página 13 3. Retirer les vis des doublures de passage de roue – À l’aide d’un tournevis à tête étoilée, retirer trois (3) vis de la doublure de passage de roue des deux côtés. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique...
  • Página 14 5. Retirer le garde-boue – À l’aide d’un embout Torx T15, retirer deux (2) vis du garde-boue derrière les doublures de passage de roue des deux côtés. Retirer les garde-boue et les conserver pour réinstallation. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 14 of 27...
  • Página 15 8. Retirer le bouchon en plastique au-dessus du réflecteur – À l’aide d’un écarteur de garniture en plastique, retirer un (1) bouchon en plastique du carénage au-dessus du réflecteur, des deux côtés. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 15 of 27...
  • Página 16 10. Retirer le panneau métallique – À l’aide d’une douille 10 mm, retirer un (1) boulon et un (1) écrou du panneau métallique au-dessus de la poutre de pare- chocs, des deux côtés. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 16 of 27...
  • Página 17 Installer lâchement huit (8) boulons d’usine M14 existants de montage des supports d’attelage latéraux, voir la Figure 2. sur l’attelage, voir Figure 1. included Figure 2 ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 17 of 27 76339NP 08-05-20 Rev. A...
  • Página 18 16. Réinstaller les panneaux métalliques, le faisceau de fils, le carénage, les garde-boue, les doublures de passage de roue, le panneau et le bouchon en plastique and plug, et toute la visserie. ©2020 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 18 of 27...
  • Página 19: Garantía Limitada De Por Vida

    [email protected] GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global Americas Inc. ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 20: Aplicaciones

    Peso máximo de la remolque horquilla 4000 lb. (1814 kg) 400 lb. (181.4 kg) Carga de peso Distribución de peso Ilustración del enganche ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 20 de 27 76339NP 08-05-20 Rev. A...
  • Página 21 No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 21 de 27...
  • Página 22 3. Quitar los tornillos de los revestimientos de los receptáculos de las ruedas: con un destornillador de estrella (Phillips), quitar (3) tornillos de los revestimientos de los receptáculos de las ruedas en ambos lados. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 22 de 27...
  • Página 23 5. Quitar la solapa de barro: con una Torxbit T15, quitar (2) tornillos de la solapa de barro detrás de los revestimientos de los receptáculos de las ruedas en ambos lados. Quitar las solapas de barro y conservarlos para la reinstalación. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 23 de 27...
  • Página 24 8. Quitar el tapón plástico encima del reflector: con la herramienta de extracción de molduras plásticas, quitar (1) tapón plástico de la fascia encima del reflector, en ambos lados. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 24 de 27...
  • Página 25 10. Quitar el panel de metal: con un cubo de 10 mm, quitar (1) perno y (1) tuerca del panel de metal por encima del travesaño del parachoques, en ambos lados. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 25 de 27...
  • Página 26 Instalar sin apretar (8) pernos de fábrica M14 existentes en el enganche, ver la Figura 1. included Figure 2 ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 26 de 27 76339NP 08-05-20 Rev. A...
  • Página 27 16. Volver a instalar los paneles de metal, el arnés de cableado, la fascia, las solapas de barro, los revestimientos de los receptáculos de las ruedas, el panel plástico y el tapón, y todos los fijadores. ©2020 Horizon Global Americas Inc. - Impreso en México Hoja 27 de 27...

Este manual también es adecuado para:

84339Cqt76339

Tabla de contenido