Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Problem
Possible cause
No power,
Batteries
playback does
Batteries inserted incorrectly
not start
Batteries are empty.
Contact pins are dirty.
Mains adapter
Loose connection
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off.
nF dISC
CD-RW (CD-R) is not recorded
indication
properly.
no dISC
The CD is badly
indication
scratched or dirty.
CD is not or incorrectly inserted. Insert a CD, label upwards.
The laser lens is steamed up.
indication
HOLD is activated.
HOLD
and/or no reaction
Electrostatic discharge
to controls
20
All manuals and user guides at all-guides.com
Solution
Insert the batteries
correctly.
Change the batteries.
Clean them with a cloth.
Connect the adapter
securely.
batteries.
Use FINALIZE on the
CD recorder to complete
the recording.
Replace or clean the CD.
Wait until the lens has
cleared.
Deactivate HOLD.
Disconnect the set from
power supply or take out
the batteries for
a few seconds.
Tabla de contenido
