Tabla De Contenido; Receiving And Uncrating; How To Order Replacement Parts - HYTROL HSQ Manual De Instalación Y Mantenimiento

TABLE OF CONTENTS
INTRODUCTION
Receiving and Uncrating . . . . . . . . . . . . . . . . . . . .2
How To Order Replacement Parts . . . . . . . . . . . .2
SAFETY INFORMATION
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
INSTALLATION
Support Installation . . . . . . . . . . . . . . . . . . . . . . . .4
Ceiling Hanger Installation . . . . . . . . . . . . . . . . . .4
Belt Installation . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Conveyor Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . .4
OPERATION
Conveyor Start-Up . . . . . . . . . . . . . . . . . . . . . . . . .6
MAINTENANCE
Belt Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Maintenance Checklist . . . . . . . . . . . . Back Cover
REPLACEMENT PARTS
Model HSQ Parts Drawing & List
4" End Drive & Parts List . . . . . . . . . . . . . . . . . . . .8
6" End Drive & Parts List . . . . . . . . . . . . . . . . . . . .9
Spanish Version
. . . . . . . . . . . . . . . . . . . . . . . . . . .10
Belt Width 35 .6" 43 .5"
Overall Width 40" 46"
OAW
ANCHO TOTAL
BELT WIDTH
ANCHO DEL LA BANDA
48 .5" 61"
52" 64 .5"
INTRODUCTION
This manual provides guidelines and procedures for installing, operating,
and maintaining your conveyor . A complete parts list is provided with
recommended spare parts highlighted in gray . Important safety information is
also provided throughout the manual . For safety to personnel and for proper
operation of your conveyor, it is recommended that you read and follow the
instructions provided in this manual .

• Receiving and Uncrating

1 . Check the number of items received against the bill of lading .
2 . Examine condition of equipment to determine if any damage
occurred during shipment .
3 . Move all crates to area of installation .
4 . Remove crating and check for optional equipment that may be fastened
to the conveyor . Make sure these parts (or any foreign pieces) are removed .
NOTE: If damage has occurred or freight is missing,
Contact your Hytrol Integration Partner.

• How to Order Replacement Parts

Included in this manual are parts drawings with complete replacement parts
lists . Minor fasteners, such as nuts and bolts, are not included .
When ordering replacement parts:
1 . Contact Dealer from whom conveyor was purchased or nearest HYTROL
Integration Partner .
2 . Give Conveyor Model Number and Serial Number or HYTROL Factory
Order Number .
3 . Give complete description from Parts List .
4 . Give type of drive . Example-8" End Drive, 8" Center Drive, etc .
5 . If you are in a breakdown situation, call our Customer Care team at
1-844-4HYTROL .
Jonesboro, Arkansas
Serial # 615415
HYTROL Serial Number
(Located near Drive on Powered Models) .
2
Model
QR Code
YEAR