General Power Tool Safety Warnings; Work Area Safety; Personal Safety - DeWalt DCS310 Manual Del Usuario

Weight
EngLIsH
Cat #
DCB546
DCB547
DCB181
DCB182
DCB183/B
DCB184/B
DCB185
DCB187
DCB141
DCB142
DCB143
DCB144
DCB145
DCB125
DCB127

General Power Tool Safety Warnings


WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.

1) Work area safety

a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
26
Batteries
Weight
DCB107
V Ah kg
DC
18/54 6.0/2.0 1.05 270
18/54 9.0/3.0 1.25 420
18 1.5 0.35 70
18 4.0 0.61 185
18 2.0 0.40 90
18 5.0 0.62 240
18 1.3 0.35 60
18 3.0 0.48 140
14.4 1.5 0.30 70
14.4 4.0 0.54 185
14.4 2.0 0.30 90
14.4 5.0 0.52 240
14.4 1.3 0.30 60
10.8 1.3 0.20 60
10.8 2.0 0.20 90
Chargers/Charge Times (Minutes)
DCB113 DCB115 DCB118 DCB132
140 90 60
220 140 85
35 22 22
100 60 60
50 30 30
120 75 75
30 22 22
70 45 45
35 22 X
100 60 X
50 30 X
120 75 X
30 22 X
30 22 X
50 30 X
c ) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f ) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.

3) Personal safety

a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
c ) Prevent unintentional starting. Ensure the switch
is in the off position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
invites accidents.
d ) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
DCB119
90 180
140 270
22 45
60 120
30 60
75 150
22 40
45 90
22 45
60 120
30 60
75 150
22 40
22 40
30 60