Installing The Top Housing - Kichler PINION 60 Manual De Instrucciones

INSTALLING THE TOP HOUSING

Step 1. Remove the clip, cross pin and two set screws from the top coupling of the
motor body, and save for later use on step 4. (Fig. 5)
Clip
Crosspin
Motor Body
Set Screw
Fig. 5
Step 2. Carefully feed the fan wires up through the center hole of top housing, place
the top housing over the motor body and align the holes. Insert three (3) screws
from the hardware pack into the holes and securely tighten them. (Fig.6)
Screw ( 3 )
Top Housing
Fig. 6
6