Attaching The Fan Blades; Installing The Switch Housing - Kichler Bead 54 Manual De Instrucciones

ATTACHING THE FAN BLADES

Step 1. Insert the blade through the slot on the motor housing, align the Step 1. Insert the blade through the slot on the motor housing, align the
holes on the blade and blade bracket, secure with the screws and washers holes on the blade and blade bracket, secure with the screws and washers
provided. Repeat process with the other blades. (Fig. 13) provided. Repeat process with the other blades. (Fig. 13)

INSTALLING THE SWITCH HOUSING

Step 1. Remove the screw marked with a dot label on the mounting plate and Step 1. Remove the screw marked with a dot label on the mounting plate and
save for later use, and slightly loosen the other two screws. Attach the switch save for later use, and slightly loosen the other two screws. Attach the switch
housing to mounting plate using the two key slots in the switch housing. housing to mounting plate using the two key slots in the switch housing.
Replace the previously removed screw and securely tighten all 3 screws. (Fig. Replace the previously removed screw and securely tighten all 3 screws. (Fig.
14) 14)
Blade
Washer
Screw
Fig. 13
Mounting Plate
Switch Housing
Fig. 14
54" Bead LED | 11