Safety Rules - Kichler PINION 60 Manual De Instrucciones

1. To reduce the risk of electric shock, insure electricity ha
been turned o at the circuit breaker or fuse box before
beginning.
2. All wiring must be in accordance with the Nation
Electrical Code and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
3. WARNING: To reduce the risk of fire or electric shock, use
only the control provided with the fan.
4. WARNING: To reduce the risk of fire, electric shock, or
Personal Injury, mount directly to a structural framing
member or to an outlet box marked "Acceptable for Fan
Support of 15.9kg(35 lbs)or less". For outlet box mounting,
use mounting screws provided with the outlet box.
5. To operate the reverse function on this fan, press th
reverse button while the fan is running.
6. Avoid placing objects in the path of the blade
7. To avoid personal injury or damage to the fan and oth
items, be cautious when working around or cleaning the
fan.
2 | KICHLER.COM

SAFETY RULES

READ AND SAVE THESE INSTRUCTIONS
8. The fan must be mounted with a minimum of 2.13 m (7 ft.) fro
the floor and 76 cm (30 in.) from any wall or obstruction.
9. Do not use water or detergents when cleaning the fan or fa
blades. A dry dust cloth or lightly dampened cloth will be suitable
for most cleaning.
10. After making the electrical connections, spliced conducto
should be turned upward and pushed carefully up into outlet box.
The wires should be spread apart with the ground wire and white
(common) wire to one side with the black (load) wire to the other
side of the outlet box.
11. Electrical diagrams are reference only.Light kits that are n
packed with the fan must be ETL Listed and marked suitable
for use with the model fan you are installing. Switches must
be ETL General Use Switches. Refer to the Instructions
packaged with the light kits and switches for proper assembly.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT
BEND THE BLADE BRACKETS (ALSO REFERRED TO AS
FLANGES) DURING ASSEMBLY OR AFTER INSTALLATION.
DO NOT INSERT OBJECTS IN THE PATH OF THE BLADES.
60" PINION
3