Installing The Switch Housing - Kichler Grace LED Manual De Instrucciones

INSTALLING THE SWITCH HOUSING

Step 1. Remove one of three screws which preinstalled on mounting plate and Step 1. Remove one of three screws which preinstalled on mounting plate and
keep for later use. Loosen the other two (do not remove). (Fig. 19) keep for later use. Loosen the other two (do not remove). (Fig. 19)
Step 2. Place the two slot holes on the switch housing over the 2 screws Step 2. Place the two slot holes on the switch housing over the 2 screws
previously loosened from the mounting plate. Rotate the switch housing until previously loosened from the mounting plate. Rotate the switch housing until
it locks in place at the narrow end of the key holes. Securely by tightening the it locks in place at the narrow end of the key holes. Securely by tightening the
2 screws previously loosened and the one previously removed. (Fig. 20) 2 screws previously loosened and the one previously removed. (Fig. 20)
12 | KICHLER.COM
Mounting Plate
Screw
Fig. 19
Switch Housing
Screw
Fig. 20