Pairing Transmitter And Receiver - HumanTechnik earis Instrucciones De Servicio

Pairing transmitter and receiver

For "earis" to function properly, transmitter and receiver must be paired. As
a rule, this has already been done during production and is carried out as
a standard on delivery.
However, if you want to use another receiver or perhaps have to replace
one later, it must first be paired with the transmitter.
A maximum of 2 receivers can be used simultaneously with one transmitter.
There are 2 ways to pair a receiver with the transmitter:
1. When inserting a new receiver into the charging dock of the transmitter,
they will be paired automatically.
Or 2. Press and hold the tone control button until the status LED on the
front of the transmitter starts flashing rapidly.
Underchin receiver: Wear the underchin receiver to switch it on.
Pocket receiver: You must remove the pocket receiver from the charging
dock to turn it on.
Press the function button on the top of the receiver until the flashing status
LED on the transmitter lights up constantly. This indicates that transmitter
and receiver are now paired.
42 English